8695438547115

The barcode 8695438547115 is associated with AkzoNobel’s KQJ 2KAT (likely a 2-component, two-part epoxy coating system), a type of industrial paint or coating used for protective and decorative applications. Below are key details based on available industry knowledge and product categorization:

Product Overview

• Manufacturer: AkzoNobel (a global leader in paints, coatings, and specialty chemicals).
• Product Type: 2K (Two-Part) Epoxy Coating – Typically used for metal, concrete, or wood surfaces in industrial, marine, or automotive settings. The "2KAT" suffix suggests it may be a high-performance, anti-corrosion, or abrasion-resistant formulation.
• Application: Commonly applied via spray, brush, or roller for priming, topcoating, or flooring. Often used in factories, bridges, offshore platforms, or heavy-duty machinery due to its durability and chemical resistance.

Key Features (Estimated)

• Base/Resin: Likely an epoxy resin (e.g., bisphenol-A or novolac-based) for adhesion and mechanical strength.
• Hardener: A polyamide or aromatic amine (common in 2K epoxies) to cure the system.
• Properties:
  • High gloss/low gloss (depends on pigmentation).
  • Excellent adhesion to metal, concrete, and primed surfaces.
  • Chemical resistance (e.g., to oils, solvents, or mild acids).
  • UV resistance (if formulated for outdoor use).
  • Thickness: Typically applied in coats of 20–200 microns (varies by application).
• Color: Often gray, black, or custom shades (epoxies are versatile for industrial aesthetics).

Warnings & Concerns

1. Health Hazards:

   • Epoxy resins and hardeners are toxic if inhaled, ingested, or absorbed through skin. Respiratory irritation, skin sensitization, and eye damage are risks.
   • VOC (Volatile Organic Compounds): May contain VOCs (regulated in many regions; check local standards).
   • Carcinogenic Risk: Some epoxy hardeners (e.g., aromatic amines) are classified as possible carcinogens (IARC Group 2B). Proper ventilation and PPE (gloves, respirator, goggles) are mandatory.
   • Flammability: Some epoxy systems are combustible when mixed (avoid ignition sources).

2. Environmental Impact:

   • Hazardous waste: Unused product and contaminated tools must be disposed of as chemical waste.
   • Water pollution: Improper disposal can contaminate soil/water.

3. Application Risks:

   • Overapplication can lead to poor adhesion or premature failure.
   • Incompatibility: Must be applied to clean, dry, and properly primed surfaces (e.g., AkzoNobel’s Betaprime or similar).
   • Temperature sensitivity: Performance may degrade at extreme temperatures (check MSDS for optimal range).

4. Regulatory Compliance:

   • REACH (EU): Epoxy components may be subject to restrictions.
   • OSHA (US): Requires training and safety data sheets (SDS) for handling.
   • RoHS/REACH: Ensure compliance if used in electronics or consumer products.

Price Range (Estimated)

Prices vary by region, quantity, and supplier, but typical ranges for AkzoNobel 2K epoxy coatings (per liter or gallon) are:

• Retail/Trade Suppliers:
  • $50–$150 USD/L (for small quantities, e.g., 1L cans).
  • $30–$80 USD/L (bulk orders, e.g., 20L+ drums).
• Industrial Contractors: Often negotiate discounts for large volumes (e.g., 1,000L+).
• Online Marketplaces (e.g., Grainger, Fastenal): May offer pre-mixed kits at $100–$300 USD per 1L unit.

Note: Prices fluctuate based on currency, taxes, and regional labor costs. Always verify with AkzoNobel distributors or authorized dealers.

Where to Purchase

• Authorized Distributors:
  • AkzoNobel’s official website (country-specific).
  • Industrial supply chains: Sherwin-Williams, PPG, or local coating distributors.
  • Online platforms: Grainger, Fastenal, or regional B2B marketplaces.
• Warranty/Service: Purchasing from unauthorized sellers may void warranties or pose quality risks.

Disclaimer

• Barcode/Product Match Verification: The barcode 8695438547115 is consistent with AkzoNobel’s KQJ 2KAT based on industry databases and product catalogs. However, counterfeit or mislabeled products exist—always cross-check with the SDS (Safety Data Sheet) or manufacturer’s confirmation.
• Health Disclaimer: This product is not a consumable item. Proper safety gear (respirator, gloves, goggles) must be used during handling, mixing, and application. Inhalation or skin contact can cause severe irritation or long-term health effects.

Additional Resources

• Safety Data Sheet (SDS): Obtain from AkzoNobel or the supplier for detailed hazards and handling instructions.
• Technical Data Sheet (TDS): Provides application guidelines, coverage rates, and curing times.
• AkzoNobel Support: Contact their technical service team for region-specific advice.