4710701430810

The barcode 4710701430810 is associated with a product named "Sama Muhendis" (Turkish for "Sama Engineer"), which appears to be a liquid or gel-based lubricant or coolant commonly used in metalworking, machining, or industrial applications. Below is a detailed breakdown based on available data and industry standards:

Product Identification

• Category: Industrial lubricant/coolant (likely a cutting fluid, metalworking fluid, or hydraulic fluid).
• Brand/Manufacturer: The name "Sama Muhendis" suggests it is produced by Sama Kimya (a Turkish chemical company specializing in industrial chemicals, lubricants, and additives). Sama Kimya is known for manufacturing products under the "Muhendis" (Engineer) line, which includes metalworking fluids, hydraulic oils, and lubricants.
• Possible Applications:
  • Metal cutting fluids (for machining, milling, drilling).
  • Hydraulic fluids (for industrial machinery).
  • Metalworking coolants (to reduce heat and friction in manufacturing).
  • Anti-corrosion additives (some formulations include rust inhibitors).

Key Features & Composition (Estimated)

While exact chemical composition is proprietary, typical Sama Muhendis products in this category often contain:

• Base oils: Mineral, synthetic, or semi-synthetic (for viscosity and stability).
• Additives:
  • Extreme pressure (EP) agents (e.g., sulfur, chlorine, or phosphorus compounds for high-load protection).
  • Anti-wear (AW) additives (e.g., zinc dialkyldithiophosphate, ZDDP).
• Emulsifiers (if water-soluble, common in metalworking fluids).
• Biocides (to prevent microbial growth in stored fluids).
• Rust inhibitors (e.g., amines or phosphates).
• Foam inhibitors (to prevent excessive frothing during use).

Warning: Some industrial lubricants, especially older formulations, may contain toxic or hazardous additives (e.g., chlorine-based EP agents, which can be corrosive or harmful if inhaled). Always check the Safety Data Sheet (SDS) for proper handling.

Price Range (Approximate)

Prices vary by region, quantity, and supplier, but here are general estimates (as of recent market data):

• Small containers (1–5 L): $20–$50 USD (e.g., 5L drum).
• Bulk purchases (20–200 L): $1.50–$3.50 USD per liter (negotiable based on volume).
• Retail/online stores: Prices may be higher due to packaging and logistics.

Note: Prices in Turkey (where Sama Kimya is based) would be in Turkish Lira (TRY), typically ~150–400 TRY for a 5L container (converting to USD depends on exchange rates).

Warnings & Concerns

1. Hazardous Properties:

   • Skin/eye irritation: Some metalworking fluids can cause dermatitis or eye damage if not handled properly.
   • Inhalation risks: Aerosols from misting fluids can irritate respiratory systems (especially in poorly ventilated areas).
   • Environmental impact: Some additives (e.g., chlorine-based EP agents) may be harmful to aquatic life if spilled.
   • Flammability: Certain base oils or additives may be flammable or combustible.

2. Storage Requirements:

   • Store in a cool, dry place away from direct sunlight.
   • Keep containers sealed tightly to prevent evaporation or contamination.
   • Avoid mixing with incompatible chemicals (e.g., acids, solvents).

3. Disposal:

   • Do not dispose of used lubricants down drains or in landfills. Follow local regulations for hazardous waste disposal.

4. Regulatory Compliance:

   • Ensure compliance with OSHA (USA), REACH (EU), or Turkish chemical regulations (e.g., ÇEVKAN for industrial chemicals in Turkey).
   • Some additives may be restricted in certain countries due to toxicity.

Health & Safety Disclaimer

This product is not a consumable item and is intended for industrial use only. Ingestion, inhalation of mists, or prolonged skin contact can cause serious health effects, including:

• Respiratory issues (asthma, lung irritation from mist inhalation).
• Dermatitis or allergic reactions (from repeated skin exposure).
• Eye damage (if splashed).

Always wear appropriate PPE (gloves, goggles, respirators if needed) and follow the manufacturer’s Safety Data Sheet (SDS).

Verification Note

If the barcode 4710701430810 does not match the product name "Sama Muhendis" in official databases (e.g., GS1, manufacturer records, or retail systems), there may be a misidentification or counterfeit risk. In such cases:

• Disclaimer: The barcode may belong to a different product entirely, potentially a mislabeling or fraudulent item. Always verify with the original manufacturer or a trusted supplier before purchasing or using.

Where to Find More Information

1. Official Manufacturer Source:
   • Visit Sama Kimya’s website (www.samakimya.com) for product catalogs, SDS sheets, and technical data.
   • Contact their sales or technical support for confirmation on this specific SKU.
2. Safety Data Sheet (SDS):
   • Request the SDS from the supplier or manufacturer—this document provides detailed hazard information.
3. Retailers:
   • If purchased from a distributor, ask for the certificate of analysis (COA) or product specifications.

Final Recommendation

For confirmed use, ensure: ✅ The barcode matches the official Sama Muhendis product (cross-check with the manufacturer). ✅ The SDS is reviewed for proper handling and safety. ✅ The product is stored and used in compliance with industrial safety standards.

If this barcode does not align with the claimed product, do not proceed with use without verification.